Specifications
Surface Treatments
Certifications
- ISO 9001 - 2015 Certified
- PED 2014/68/EC
- NACE MR0175/ISO 15156-2
- NORSOK M-650
- DFAR
- MERKBLATT AD 2000 W2/W7/W10
Nitronic 60 Machining Speeds and Feeds (Turning, Drilling, Threading)
Nitronic 60 speeds and feeds are conservative compared to free-machining steel due to the 35 percent relative machinability rating. Positive-rake carbide tooling is preferred; cobalt-HSS acceptable for prototype work. Coolant flood is essential. Rigid setup matters; vibration accelerates tool wear and produces poor surface finish.
TorqBolt stocks Nitronic 60 (UNS S21800) at our Mumbai head office and Rajkot production plant. Each consignment ships with EN 10204 3.1 mill test certification by default and 3.2 dual-witnessed inspection (Lloyds, TUV, DNV, BV) on request. Contact info@torqbolt.com or +91-22-66157017 for sized stock and lead time.
Operation-Specific Parameters
Turning carbide: surface speed 30 to 60 m/min, depth of cut 1.0 to 2.5 mm, feed 0.10 to 0.30 mm/rev. Use coolant flood.
Turning HSS: surface speed 8 to 15 m/min, depth of cut 0.5 to 1.5 mm, feed 0.05 to 0.15 mm/rev.
Drilling cobalt-HSS: surface speed 12 to 20 m/min, feed 0.08 to 0.20 mm/rev. Peck-drill on holes deeper than 3 diameters.
Drilling carbide: surface speed 25 to 40 m/min, feed 0.10 to 0.25 mm/rev.
Threading: peripheral speed 15 to 25 m/min, depth-per-pass 0.05 to 0.10 mm for carbide thread mill.
See machinability page for tool selection guidance and chip-evacuation strategy.
Chemistry — UNS S21800
Cr 16-18 / Mn 7-9 / Ni 8-9 / Si 3.5-4.5 / N 0.08-0.18 / C ≤0.10. See full element ranges with single and aggregate limits →
Mechanical Properties
Yield 55 ksi (380 MPa) min, tensile 95 ksi (655 MPa) min, elongation 35% min (annealed). Hardness Rockwell B95-95 typical. See full mechanical specification with bar / forging / wire conditions →
Galling Resistance
Nitronic 60 threshold stress 50,000 psi+ per ASTM G98 vs 304/316L at 4,000-6,000 psi — 5 to 10× better galling resistance. See full ASTM G98 data and galling failure mechanism →
Heat Treatment
Solution anneal only at 1900-1950°F followed by water quench. No precipitation hardening response. See full heat treatment specification →
Welding
Matching filler ER218 per AMS 5847. GTAW, GMAW, and SMAW all qualified. No PWHT required for typical thicknesses. See full welding procedure →
Material Selection
Nitronic 60 wins for anti-galling at high temperature where 304/316L gall. Stellite is harder but brittle. vs 316L · vs Nitronic 50 · austenitic context →
Nitronic 60 Applications by Industry
- Marine and offshore, anti-galling bolting and deck hardware.
- Oil and gas, subsea wellhead, NACE MR0175 sour service, christmas-tree fasteners.
- Nuclear, valve trim, pump shafts, reactor coolant bolting.
- Food processing, FDA-acceptable austenitic, sanitary fittings, mixer paddles.
- Cryogenic, LNG hardware, austenitic stability to -196 C.
- Pump and rotating equipment, shafts and bushings under sliding seal contact.
- Valve stems, gate / globe valve stems under pressure cycling.
- Anti-galling general applications, cross-industry summary.
Related Nitronic 60 Forms and Fasteners
- Bar: round bar, hex bar, square bar, flat bar.
- Plate, sheet, forgings: plate, sheet, forgings.
- Wire and tubing: wire, spring wire, tubing, seamless pipe.
- Bolts: hex bolts, stud bolts, anchor bolts, socket head cap screws.
- Nuts: hex nuts, heavy hex nuts, lock nuts, jam nuts.
- Pins and inserts: dowel pins, clevis pins, bushings, Helicoil thread inserts.
- Catalog: full Nitronic 60 fastener portfolio, anti-galling fasteners.
Request a Quote
For Nitronic 60 stock with verified speeds and feeds certification, Contact the TorqBolt QA-QC team at info@torqbolt.com or +91-22-66157017. We respond within 24 hours with sized stock availability, lead time, and EN 10204 3.1 / 3.2 MTC documentation samples.
Frequently Asked Questions
What is the Nitronic 60 speeds and feeds?
See the values in the table above. The speeds and feeds of Nitronic 60 is one of the property metrics that distinguishes it from 304 / 316L.
Why does Nitronic 60 speeds and feeds matter?
For design engineering decisions, speeds and feeds directly affects component sizing, service envelope, and material substitution choices.
How is speeds and feeds verified?
Standard test methods per ASTM. Mill test certificate (EN 10204 3.1) reports the measured value for the heat lot.
What is the temperature dependence?
Nitronic 60 retains useful properties from -196 C cryogenic to ~815 C upper service temperature. Above 540 C check sigma-phase precipitation envelope.
Satisfaction Survey
